File initialization.cpp

File List > examples > initialization.cpp

Go to the documentation of this file

#include "Arduino.h"
#include "../Radiocrafts_RC17xxHP_RC232.h"

// Assigning pins
uint8_t pinCFG = PIN_PA5;
uint8_t pinRST = PIN_PG7;
uint8_t pinCTS = PIN_PA3;
uint8_t pinRTS = PIN_PA4;

// Assigning a serial port
uint8_t pinTX = PIN_PA0;
uint8_t pinRX = PIN_PA1;
HardwareSerial *SerialModule = &Serial0;
uint32_t baudrate = 19200;

// Radio module initialization
RC17xxHP_RC232 rc1780hp(SerialModule, pinTX, pinRX, 19200, pinCFG, pinRST, pinCTS, pinRTS);

int main()
{
    // Initialize radio transceiver and wait until communication is established
    delay(3.2 * 10); // Necessary delay: t_{OFF-IDLE} = 3.2, safety factor 10
    rc1780hp.begin();
    delay(3.2 * 10); // Necessary delay: t_{OFF-IDLE} = 3.2, safety factor 10
    rc1780hp.ping();

    // The non-standard setting can be reconfigured
    while (rc1780hp.set_RF_DATA_RATE(0x05) != 0)
        ;
    // ...

    // Resetting the module for the configuration to take place
    rc1780hp.resetHard();
    rc1780hp.flush();
}